PRODUCT CATEGORIES

High-resolution thermal printing array system
Frequency response is as high as 150Hz
Capable of printing continuously on channel trace and annotations including lead mark and parameter such as sensitivity, paper speed and filter operation status
High resolution digital filter inhibits baseline drift without affecting ECG waveform
One-touch operation
Concept of floating input circuit meets IEC safety standard
Rechargeable battery supporting more than 50 patient examinations
Lead Standard: 12 leads

MODEL:	ECG 100G
Running Environment Temperature	±5°C - +35°C
Relative humidity	≤80%
Atmospheric pressure	86kPa – 106kPa
Storage and transportation environment temperature	-10°C - 55°C
Relative humidity	≤95%
Atmospheric pressure	50kPa – 106kPa
ECG Input Circuit	Floating; protection against defibrillator effect.
Lead	Standard 12 leads
Patient Current Leakage	10µA
Sampling Rate	1000Hz
Frequency Response	0.05Hz~150Hz (-3dB)
A/D change	12 bites
Time constant:	>3.2 seconds
CMRR	>60dB >100dB (Add Filter)
Enduring polarization voltage	±500mV
Noise Level	<15µVp-p
Measurement parameters EMG Interference filter	35Hz (-3dB)
AC filter	50Hz/60Hz (≥20dB)
Sensitivity choice	5,10,20mm/mV, error ±5% standard sensitivity is 10mm/mV ±0.2mm/mV
Wave Output Recording way Auto-record Manual record Specification of recording paper Paper speed	Thermal printing system Auto leads – changing Manual leads – changing 50mm (W) x 20mm (L) – high speed thermal paper 25mm/s, 50mm/s, error ± 5%
Product safety Type	Class I, type CF applied part, which has defibrillation – proof applied part
Fuse Specification	2 pcs Ø5 x 20mm AC time lag: T250mA/250V (power supply: 220V)
Dimensions	315mm (L) x 215mm (W) x 77mm (H)
Net Weight	2.25kg
Power Supply	AC: 220V, 50Hz (110V, 60Hz) DC: 7.4V, 3700 mAh rechargeable lithium battery